Adding A Track Mark - Sony MD Walkman MZ-R55 Operating Instructions Manual

Sony minidisc operating instructions
Hide thumbs Also See for MD Walkman MZ-R55:
Table of Contents

Advertisement

zEditing recorded tracks
You can edit your recordings.
Premastered MDs cannot be edited.
Notes
When you press p after editing, "Toc Edit"
flashes for about a second. Do not move or
jog the recorder or disconnect the power
source while the indication is flashing.
You cannot edit on an MD with its tab open
for protection. Before editing, close the tab at
the side of the MD.
Erasing a track
See the illustration in the Japanese text
(page 24).
You can quickly erase a recorded track.
Note that once a recording has been erased,
you cannot retrieve it.
1
Press EDIT/ENTER while playing the
track you want to erase.
"
: Name" flashes in the display,
and the recorder plays the selected
track repeatedly.
Press = or + repeatedly until
2
"
: Erase" flashes in the display.
Press EDIT/ENTER again.
3
"Erase OK?" and "Push ENTER"
appear alternately in the display.
To cancel erasing, press p or T MARK.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.
56
Erasing a whole disc
See the illustration in the Japanese text
(page 24).
You can erase all the tracks on a disc at a
time. Note that once a recording has been
erased, you cannot retrieve it.
1
Press EDIT/ENTER on the recorder.
2
Press = or + repeatedly until
"
: Erase" flashes in the display.
3
Press EDIT/ENTER again.
"All Erase?" and "Push ENTER"
appear alternately in the display.
To cancel erasing, press p or T MARK.
Press EDIT/ENTER again.
4
"Toc Edit" flashes in the display, and
all the tracks will be erased.
When erasing is complete, "BLANK
DISC" appears in the display.

Adding a track mark

See the illustration in the Japanese text
(page 25).
You can insert a track mark into a track.
1
While the recorder is playing or
pausing an MD, press T MARK on the
recorder at the point you want to
mark.
"MARK ON" appears in the display,
and the track mark is added.
To add track marks while recording.
Press T MARK while recording (except while
Synchro-recording).

Advertisement

Table of Contents
loading

Table of Contents