Adding A Track Mark; Erasing A Track Mark - Sony MZ-R55 Operating Instructions Manual

Adding a track mark

You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
1 2
4
Track marking
.
1 2
Track numbers increase
1
While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
"MARK ON" appears in the display,
and a track mark is added. The track
number will increase by one.
To add track marks while
recording
Press T MARK on the recorder or TRACK
MARK on the remote control.
Note
TRACK MARK on the remote control does
not function during playback.
22-
GB
3 4
3 4 5
T MARK

Erasing a track mark

When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
1 2
4
Erase a track mark
.
1 2
Track numbers decrease
=
P
1
While playing the track with the track
mark you want to erase, press P to
pause.
2
Find the track mark by pressing =
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
3
Press T MARK to erase the mark.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, the date, time,
and name assigned to the mark are also
erased.
3 4
3
T MARK