Sony WEGA KLV-17HR2 Quick Start Manual page 61

Problem
Distorted picture when changing
programmes or selecting Teletext
Wrong characters appear when viewing
Teletext.
Wrong characters appear when viewing
NexTView.
No sound/Noisy sound
Good picture, no sound
Audio noise
Menu item is not displayed.
Strange sound
The TV cabinet creaks.
The TV ticks.
The TV buzzes.
Remote control does not function.
The (Standby/Sleep) indicator on the
TV flashes.
Possible remedies
• Turn off any equipment connected to the Scart connector on
the rear of the TV.
• Using the menu system, select the "Language" and
"Country" options in the "Set Up" menu and set the language
and country/region in which you view Teletext (page 40).
For Cyrillic languages, we recommend that you select Russia
in case your own country/region does not appear in the list.
• Using the menu system, select the "Language" and
"Country" options in the "Set Up" menu and set the language
and country/region in which NexTView is provided
(page 40).
%
• Press 2 +/– or (Mute) on the remote control.
• Check that the "Speaker" option is set to "On" in the
"Features" menu (page 39).
• Make sure that the aerial is connected using the supplied
coaxial cable.
• Keep the aerial cable away from other connecting cables.
• Do not use 300-ohm twin lead cables as interference may
occur.
• Some items cannot be selected depending on the signal or
other settings. Refer to the instructions on each menu item.
• Changes in room temperature sometimes cause the TV
cabinet to expand or contract, which can make slight noises.
This does not indicate a malfunction.
• An electrical circuit inside the TV is activated when the TV
is turned on. This does not indicate a malfunction.
• There might be a surge sound when turning on the TV. This
does not indicate a malfunction.
• Check that the remote control is set correctly for the device
you are using (VCR, TV, or DVD).
• If the remote control does not operate the VCR or DVD even
when the remote control has been set correctly to VCR or
DVD, enter the necessary code set as explained in "Remote
Control Configuration for VCR/DVD" (page 53).
• Replace the batteries.
• Refer to "Self-diagnosis function" (page 57) and contact
your nearest Sony service centre.
Additional Information
GB
59