Sony WEGA KLV-17HR2 Quick Start Manual page 44

Manual
Programme Preset
42
Menu System
The "Manual Programme Preset" option (A–E) allows you to:
A)
Preset channels, one by one, in the programme order of your choice.
To do this:
1
After selecting this option, press
2
Highlight the Programme option and press
3 Press or to select a programme number for which you want to
preset the channel, then press
options for the channel, press OK instead of
4
After selecting the System option, press
Depending on the country/region you have selected in the
"Country" option, this option may not be available (see
page 40).
5 Press or to select the TV Broadcast system (B/G for western
European countries/regions, D/K for eastern European countries/
regions, I for the United Kingdom, or L for France), then press
you do not want to preset other options for the channel, press OK
instead of and go to step 8.
6
After selecting the Channel option, press
7
Press or to select the type of channel to be tuned (S for cable
channels or C for terrestrial channels), then press
After that, press the number buttons to enter the channel number of
the TV Broadcast directly. If you do not know the channel number,
press or to search for it.
When you have tuned the desired channel, press OK.
8
Highlight the Confirm option and press OK. Then press
OK and finally press OK to store your channel selection.
Repeat all the above steps to tune and store other channels.
B)
Label a channel using up to five characters (letters or numbers).
To do this:
1 Press PROG +/– to select the programme number with the channel
you want to name.
You cannot select the programme number set to skip in the
"Skip" option (see step D on page 43).
2
When the programme you want to name appears on the screen, select
the Label option and press
3 Press / /
4
When you have finished, press
"End" on the screen and press OK to exit the character input screen.
• If you input a wrong character, select the character using
the screen. Then press
character and press OK.
• For a blank, select
.
. If you do not want to preset other
.
or to select the first character, then press OK.
/ /
/ / or to select the correct
on the screen and press OK.
.
and go to step 8.
.
. If
.
.
to select
or to select the word
or on