3. Replace the two (M1.6x1.8) screws that secure the left and right speakers to the palm-rest and keyboard assembly.
4. Connect the left and right speaker cables to the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Smart-card reader
Removing the smart-card reader
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the speakers.
About this task
The figure indicates the location of the smart-card reader and provides a visual representation of the removal procedure.
38
Removing and installing components
After working inside your
before working inside your
computer.
computer.