Steps
1. Align and insert the heat-sink into its slot on the system board.
2. Tighten the five captive screws that secure the heat-sink to the system board.
NOTE:
Loosen the captive screws in the order that is marked on the heat-sink next to the screws [1 > 2 > 3 > 4 > 5].
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Audio jack
Removing the audio jack
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following images indicate the location of the audio jack and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
33