Sony BRAVIA 4-193-041-12 Operating Instructions Manual page 26

Signal
Information
CA - Module
PC Setup (for PC input)
Auto Adjust
Horizontal
Position
Vertical Position
Size
Phase
Auto Adjust Mode
Timer
Clock
Off Time
26
GB
Skips unused digital channels when you press
Skip
select channels. To select a channel that is set to be skipped,
press the number buttons to enter the corresponding channel
number.
P ress
1
P ress
2
3
j
skipped.
Provides information about Channel, Network, Modulation, signal quality and
signal strength (in digital mode only).
Allows you to perform the settings for the CA - Module that you can insert to your
TV. When a CI-module is inserted for a channel that makes scrambled broadcast in
CI standards, this feature opens a submenu and allows you perform the information
updates about the module.
The most suitable geometric settings in accordance with the entry mode are
configured by this function.
Moves the screen to the left or to the right.
Moves the screen up or down.
This is the pixel clock frequency. You can narrow down or enlarge the display by
selecting a desired value
Using , you can ensure that the colours and shapes are exactly consolidated on
G g
/
the PC image.
Automatically adjusts the display position, and phase of the picture in PC mode.
Allows you to set the clock manually. When the TV receives digital channel
broadcasts, you cannot set the clock manually since the time code is obtained
automatically from the broadcast signal.
TV switches to the standby mode automatically at the specified times and
dates.
Repeat / Hour
/ Minute
to select the channel you want to skip.
F f
/
to select , then press
G g j
/
symbol will appear next to the name of the channel to be
P ress to select "Repeat", then press
1 F f
/
select the repeating interval.
P ress to select "Hour", then press
2 F f
/
the hour value.
P ress to select "Minute", then press
3 F f
/
the minute value.
P ress RETURN to finish setting up.
4
O
to
PROG +/-
.
3
to
G g
/
to enter
G g
/
to enter
G g
/