ADLINK Technology aTCA-3430 User Manual page 30

[root@dell-3 ~]# service xinetd restart
[root@dell-3 ~]# ls /home/work/ATCA_3430/target/boot
aTCA-3430.dtb
fsl_fman_ucode_P2040_106_1_4.bin.ucode u-boot.bin
fsl-image-full-rootfs.tar.gz
Boot into U-Boot:
=> setenv ipaddr <board_ip>
=> setenv serverip <server_ip>
=> run initrd
Update U-Boot/BSP/BCM-SDK by executing /sbin/mmcsd_lmp-installer. Change the IP address and
TFTP server IP to those of your actual environment:
root@ p2040rdb:~# /sbin/mmcsd_lmp-installer all <board_ip> <server_ip>
[Wait for about 20 minutes]
root@ p2040rdb:~# reboot
root@aTCA-3430:~# /sbin/lmp-installer
fsl-image-full-rootf
...............
***** start of config_uenv
***** end of config_uenv
root@aTCA-3430:~# reboot
uImage
1% |
rootfs.ext2.gz.uboot vendor-drops.tgz
| 3980k 0:01:45 ETA
30
aTCA-3430 User's Manual