Troubleshooting - Sony SLV-D500P Operating Instructions Manual

Troubleshooting

If you have any questions or problems not covered below, please consult your nearest Sony
dealer. (For customers in USA)
General Troubleshooting
Symptom
The ?/1 switch does not function.
The power is turned on but the DVD-
VCR does not operate.
The clock has stopped and "--:--"
appears in the display window.
The remote commander does not
function.
The tracking meter does not appear
on the screen.
You cannot control other TVs.
Remedy
• Connect the AC power cord securely.
• Moisture condensation has occurred. Turn the power off,
unplug the AC power cord and leave the DVD-VCR to
dry for over three hours.
• The clock stops if the DVD-VCR is disconnected from
the wall outlet. Reset the clock (and timer).
• Make sure you are pointing the remote commander at the
remote sensor on the DVD-VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the TV / DVD·VIDEO switch is set correctly.
• Select correctly VIDEO or DVD with the SELECT DVD/
VIDEO button.
• The recording condition of the tape is very poor and
tracking cannot be adjusted.
• Set your TV's code number. The code number may
change when you replace the batteries of the remote
commander.
continued
103
Troubleshooting