Additional Information; General Setup Information - Sony SLV-D500P Operating Instructions Manual

Additional Information

General setup information

Changing setup options
1
Press SET UP when the DVD player is in stop mode.
2 Press V/v/B/b to select
press ENTER.
The "OPTION SETUP" menu appears.
3 Press V/v to select the option to change.
4
Press B/b to change the setting.
5
Press O RETURN repeatedly to exit the menu.
If you have changed the RF Output Channel, a confirmation message appears.
Press ENTER to confirm the changed channel.
Menu choices
Initial settings are indicated in bold print.
Menu option
RF Output Channel
Auto Power Off
100
General setup information
(Option setup), then
Set this option to
• 3CH when using channel 3 to receive the VCR signal.
• 4CH when using channel 4 to receive the VCR signal.
For details, see page 101.
• 1Hr to turn off the VCR automatically one hour after the last
operation.
• 2Hr to turn off the VCR automatically two hours after the last
operation.
• Off to set no specific time to turn off.