Acer D240H Service Manual page 25

Acer
6.
Function Specifications
All the tests to verify specifications in this section shall be performed under the following standard
conditions unless otherwise noted. The standard conditions are:
Temperature
Warm-up time
Checking display modes
5.2 Panel general specifications
General specifications
5.2.1
Item
Supplier
Model name
Display Area
Pixel Pitch
Display Colors:
Input select
Hot Key Operation
5.2.2
FUNCTION
e Color AUTO MENU ◄ ► POWER
FACTORY
●
MODE
5.3 OSD Structure
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD
buttons or remote control unit. The unit shall leave the factory with all OSD controls set to their default
values.
First Second
Picture
Acer e color
Management
Brightness
: 25 ± 5°C
: 30 minutes minimum
: All the specified modes
AUO
M240HW01-V0
531.36 × 298.89
276.75(Per one triad) × 276.75
16.7M colors (RGB 6-bit + Hi_FRC)
A. Press "input key" one time to search (a port with signal in order)
B. Show "source icon" at the same time, as searching that port
C. Go into next port automatically, if search the port without signal
D. Display it, if search the port with signal
HOT KEY OPERATION
Third
e
mpowering Technology
---
Describe
Press [e], and then press [POWER]
for DC power on. OSD menu will be
ON
shown with "F" on the left top. Select
"F" for entering factory mode.
Control
Fourth
Range
User
Text
---
Standard
Graphics
Movie
0～100
---
Acer –LCD-D240H
DESCRIPTION
Default Value
Standard
User mode 77