Advertisement
Quick Links
ProPlus electric bi-level desk
REAR SIDE
USER SIDE
IMPORTANT: Longer side of foot towards user
USER SIDE
biomorph
®
ergonomic PACS furniture
IMPORTANT: Longer side of foot towards user
Ground Support Equipment (US) ltd., DBA biomorph, 11 Broadway, New York, NY 10004. 888 302 3375 fax: 212 809 4324 info@biomorphdesk.com
Advertisement
Related Manuals for SIS biomorph ProPlus
Summary of Contents for SIS biomorph ProPlus
- Page 1 ProPlus electric bi-level desk REAR SIDE USER SIDE IMPORTANT: Longer side of foot towards user USER SIDE biomorph ® ergonomic PACS furniture IMPORTANT: Longer side of foot towards user Ground Support Equipment (US) ltd., DBA biomorph, 11 Broadway, New York, NY 10004. 888 302 3375 fax: 212 809 4324 info@biomorphdesk.com...
- Page 2 IMPORTANT: OPERATION & TROUBLESHOOTING Run extra cable length through the CableCab. 1. Adjust up or down by pushing the up or down arrows. biomorph Place plugstrip inside for connections. CableCab 2. When first assembled or when unplugged, always lower ® desk frame the table to bottom, release then hold down for 10 seconds Position with removable panel facing user.
- Page 3 Operation of the DP1C The DP1C cannot be used on the CBD4 with mains cut-off. Description The DP1C is equipped with display and memory and is compatible with CBD4 (Advanced, software 077402 ver. 1.66 or later). The DP1 is only available as a 1-channel version for operation of the parallel channels up and down.
- Page 4 tensity. Initial press will show the current setting. Keep the “1” button pressed during the whole sequence while adjusting up or down. Keep a button pressed for more than 800 msec then the button will auto repeat every 100 msec. Releasing all buttons stores the new setting. Adjusting the light timeout Possible light timeouts are: 0-15 sec and off Adjustment procedure...
Need help?
Do you have a question about the biomorph ProPlus and is the answer not in the manual?
Questions and answers