Advertisement
Quick Links
Cable outlet for right operated
table is marked with a red dot
inside !
Components required:
1.
Column x 1
2.
Topplate bracket x 1
3.
Foot-base x 1
4.
Hardware Bag x 1
5.
Column collar x 1
Foot-base Variations
Hardware:
A. R011058
B. R011043 x
4x (m6 x 25)
4 x(m8 x 30)
*** For technical support please call 1.800.374.7438 #2007,servicetech@sisergo.com***
M1 Assembly Instructions
A
C. RM-175
6x (Glide)
2
1
Warning !
Do NOT remove the safety
bracket before
the table is fully assembled.
(see page 2)
B
Asssembly steps:
1.
Slide column collar(5) over the top
of the column. Do not lock in place.
Allow column collar to sit loosly on
column as shown.
2.
Attach top-plate bracket(2) to the
column(1) using four m6x25
screws(A).
Note: Make sure to mount the top-
plate bracket(2) to the column with
the side NOT marked with a red dot.
The side marked with a red dot
should be away from the column.
3.
Attach six table glides(C) to Foot-
base(3), and mount the foot-base(3)
to the column(1) using four m8x30
screws(B).
D. R011905
1x (6mm Hex Key)
Page 1 of 2
3
C
Advertisement
Related Manuals for SIS M1
Summary of Contents for SIS M1
- Page 1 M1 Assembly Instructions Page 1 of 2 Cable outlet for right operated table is marked with a red dot inside ! Warning ! Do NOT remove the safety Components required: bracket before the table is fully assembled. Column x 1...
- Page 2 M1 Assembly Instructions Page 2 of 2 Assembly steps: 4. Attach assembled frame to table-top(6) using six 5x20mm wood screws(E), or six flange screws m6x16mm(E1) when using threaded inserts in the table top. 5. Mount locking paddle(7) with two 4x16mm wood screws(F), and use cable clamps(G) with 4x16mm wood screws(F) to afix the locking cable to the table top.
Need help?
Do you have a question about the M1 and is the answer not in the manual?
Questions and answers