Do you have a question about the HLVC315B11 and is the answer not in the manual?
Questions and answers
Linda
April 14, 2025
I can’t seem to “twist” the machine apart to clean. I’ve tried everything. No release button
1 comments:
Mr. Anderson
April 14, 2025
To disassemble the Black & Decker HLVC315B11 for cleaning:
1. Turn off the device by sliding the on/off switch backward. 2. Twist the dust bowl (3) to the left to remove it from the housing. 3. Remove the filter housing (9) from the dust bowl. 4. Separate the pre-filter (9) and the filter (9a); wash them with water and let them dry completely. 5. Empty debris from the dust bowl and wash it with water, then dry it completely. 6. Clean the ventilation slots with a soft brush or dry cloth. 7. Wipe the motor housing with a damp cloth.
Page 3
(Original instructions) ENGLISH Intended use Your BLACK+DECKER HLVC315B11, HLVC315J11, HLVC320B11, HLVC320J11 Dustbuster handheld vacuum ® cleaner has been designed for light dry vacuum cleaning purposes. This appliance is intended for household use only. Safety instructions Warning! Read all safety warnings and all instructions.
Page 4
(Original instructions) ENGLISH This appliance can be used by Warning! When using children aged from 8 years and above battery-powered appliances, and persons with reduced physical, basic safety precautions, including the sensory or mental capabilities or following, should always be followed to lack of experience and knowledge reduce the risk of fire, leaking batteries, if they have been given supervision...
Page 5
(Original instructions) ENGLISH Residual risks Using the wrong charger could result in an electric shock or overheating of Additional residual risks may arise when the battery. using the tool which may not be included When disposing of batteries, follow in the enclosed safety warnings. These the instructions given in the section risks can arise from misuse, prolonged "Protecting the environment".
Page 6
7. Charger jack plug (HLVC315J11 and HLVC320J11 only) charging. 8. Charger Base (HLVC315B11 and HLVC320B11 only) Electrical safety Operation (Fig. A) To turn on slide the On/Off switch (1) forward as shown in Your charger has been designed for a figure A.
Page 7
Technical data Dispose of the dirt inside the dust bowl as shown in figure J. The dust bowl can be rinsed by water. HLVC315B11, HLVC315J11 HLVC320B11, HLVC320J11 Voltage However it needs to be dried afterwards.
Need help?
Do you have a question about the HLVC315B11 and is the answer not in the manual?
Questions and answers
I can’t seem to “twist” the machine apart to clean. I’ve tried everything. No release button
To disassemble the Black & Decker HLVC315B11 for cleaning:
1. Turn off the device by sliding the on/off switch backward.
2. Twist the dust bowl (3) to the left to remove it from the housing.
3. Remove the filter housing (9) from the dust bowl.
4. Separate the pre-filter (9) and the filter (9a); wash them with water and let them dry completely.
5. Empty debris from the dust bowl and wash it with water, then dry it completely.
6. Clean the ventilation slots with a soft brush or dry cloth.
7. Wipe the motor housing with a damp cloth.
This answer is automatically generated