Locating A Disc By Name; List-Up; Selecting Specific Tracks For Playback; Bank - Sony MDX-C7900 Operating Instructions Manual

Locating a disc by name

— List-up (CD unit with custom file function
or MD unit)
You can use this function with discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD." (page 16)
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
DISC
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• Once a disc name has been displayed for five
seconds, the display goes back to its normal
playback mode. To turn off the display, press
(DSPL).
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, "NO Disc"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "?" appears in the display. To load the disc,
first press the number button, then choose the
disc that has not been loaded.
• The information appears only in upper case.
There are also some letters which cannot be
displayed (during MD playback).
Selecting specific tracks
for playback
— Bank (CD unit with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (3) (PLAY MODE) for two
seconds.
Bank edit mode
DISC TRACK
PLAY MODE
ENTER
ENTER
Note
If you have not labeled the disc, the bank edit
mode does not appear. To go back to the
normal playback mode, press (SHIFT).
2
Push the (SEEK/AMS) control up or down
to select the track number you want to
skip and press (5) (ENTER).
DISC TRACK
PLAY MODE
The indication changes from "Play" to
"Skip". If you want to return to "Play,"
press (5) (ENTER) again.
3
Repeat step 2 to set the "Play" or "Skip"
mode on all the tracks.
4
Press (3) (PLAY MODE) for two seconds.
The unit returns to the normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set the "Play" and "Skip" mode on up
to 24 tracks.
• You cannot set the "Skip" mode on all the
tracks.
Playing the specified tracks only
You can select:
•Bank on to play the tracks with the "Play"
setting.
•Bank inv (Inverse) to play the tracks with the
"Skip" setting.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
"Bank" appears.
2
Press (4) (n) repeatedly until the
desired setting appears.
z Bank on z Bank inv

BANK

PLAY MODE
Playback starts from the track following the
current one.
3
Press (SHIFT).
To go back to the normal playback mode,
select "Bank off" in step 2 above.
ENTER
z Bank off
EN
17