Advertisement
HYUNDAI
09
7. SUPPLY TO 12V DEVICES
This unit is a power source for all 12V DC devices that are equipped with a 12V accessory plug. Plug
the device into one of the two 12V DC power outlets on the front panel. Turn on Jump start + 12V DC
power switch to start 12V power, and turn the 12V DC device on (if required).
CAUTION: Do NOT use the Portable Power to run appliances that draw more than 15A DC. Extended
!
operation of a 12V DC device may result in excessive battery drain.
NOTES: If you have to replace 12V DC power fuse(s), follow the instructions.
Step 1: Use screwdriver to take the screws out. Remove the rubber bottom panel first. Then remove the
rear panel.
Step 2: You will find the corresponding fuse box(es).
Fuse Boxes
Step 3: Remove the fuse cover and replace the fuse(s).
Step 4: Put the rear panel and bottom rubber panel in position and install the screws.
Advertisement
