Advertisement
7
On piece 10, attach the door handles (H) using screws (E).
10
9
Turn the drawer upside down. Line up the holes on the outside pieces
with the holes on the runners (LDR & LDL), secure to the drawer using
screws (D).
D
L
DR
E
H
D
L
DL
8
Slot piece 11 into the ridges. First insert the cam locks (B) into the pre-drilled
holes on parts 8 & 9. Then insert cam dowels(A) into each side, you then need
to line up these screws with the pre-drilled holes on the front piece (10). Once
attached, tighten the cam locks (B) using a cross-head screwdriver and ensure
the piece is secure.
8
B
10
Insert the drawer.
9
B
A
11
10
A
10
Advertisement
