Table of Contents
Advertisement
To share your cellphone connection by One-touch tethering
1
Be sure both devices have the NFC function turned on, and that both screens are
active.
2
From your Home screen, tap
3
Find and tap Settings > More > Tethering & portable hotspot.
4
Tap the Portable hotspot slider to enable the function.
5
Tap One-touch portable hotspot. Hold the devices together so that the NFC
detection areas of each device touch, then tap CONNECT.
This function only works with devices that also support NFC Wi-Fi tethering.
To Share Your Cellular Data Connection With Another Bluetooth® Device
1
Make sure your device and the other Bluetooth® device are paired with each
other and cellular data traffic is activated on your device.
2
Your device: From your Home screen, tap
3
Find and tap Settings > More > Tethering & portable hotspot and then tap the
Bluetooth tethering slider to enable the function.
4
Bluetooth® device: Set up the device so it gets its network connection using
Bluetooth®. If the device is a computer, refer to the relevant instructions to
complete setup. If the device runs on the Android™ operating system, tap the
settings icon beside the name of the device it is paired with under Settings >
Bluetooth > Paired devices, then mark the Internet access checkbox.
5
Your device: Wait for
complete.
6
Tap the Bluetooth tethering slider again to disable the function.
The Bluetooth tethering function is turned off every time you turn off your device or turn off the
Bluetooth® function.
To Use Your Device as a Portable Wi-Fi Hotspot
1
From your Home screen, tap
2
Find and tap Settings > More > Tethering & portable hotspot.
3
Tap Portable hotspot settings > Configure hotspot.
4
Enter the Network name (SSID) information.
5
To select a security type, tap the Security field. If required, enter a password.
6
Tap SAVE.
7
Tap
8
If prompted, tap OK to confirm.
Fi hotspot is active.
To Allow a WPS-Supported Device to Use Your Cellular Data Connection
1
Make sure that your device is functioning as a portable hotspot.
2
From your Home screen, tap
3
Find and tap Settings > More > Tethering & portable hotspot > Portable hotspot
settings.
4
Under Configure hotspot, make sure that your portable hotspot is secured by a
password.
5
Enable Discoverable, if it was disabled.
6
Tap WPS Push Button, then follow the relevant instructions. Alternatively, tap
WPS PIN Entry, then enter the PIN that appears on the WPS-supported device.
To rename or secure your Mobile hotspot
1
From the Home screen, tap
2
Find and tap Settings > More > Tethering & portable hotspot.
3
Tap Portable hotspot settings > Configure hotspot.
4
Enter the Network name (SSID) information.
5
To select a security type, tap the Security field.
6
If required, enter a password.
7
Tap SAVE.
Downloaded from
ManualsNet.com
to appear in the status bar. Once it appears, the setup is
, then tap the Portable hotspot slider to enable the function.
This is an Internet version of this publication. © Print only for private use.
search engine
.
.
.
appears in the status bar once the portable Wi-
.
.
48
>
Advertisement
Table of Contents
