Table of Contents
Advertisement
To Find the MAC Address for Your Device
1
From the Home screen, tap
2
Find and tap Settings > Wi-Fi.
3
Tap
WPS
WPS (Wi-Fi Protected Setup™) is a wireless networking standard that helps you to
establish secure wireless network connections. WPS makes it easy for you to set up Wi-
Fi Protected Access® (WPA) encryption to secure your network. You can also add new
devices to an existing network without entering long passwords.
Use one of these methods to enable WPS:
•
Push button method – simply push a button on a WPS-supported device, for example, a
router.
•
PIN method – your device creates a random PIN (Personal Identification Number), which
you enter on the WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS Button
1
From the Home screen, tap
2
Find and tap Settings > Wi-Fi.
3
Turn on Wi-Fi if it is not already on.
4
Tap
the WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS PIN
1
From your Home screen, tap
2
Find and tap Settings > Wi-Fi.
3
Turn on Wi-Fi if it is not already on.
4
Tap
5
On the WPS-supported device, enter the PIN that appears on your device.
Sharing your cellular data connection
You can share your cellular data connection with other devices in several ways.
•
USB tethering
: Share your cellular data connection with a single computer using a USB cable.
•
Portable Wi-Fi hotspot
: Share your cellular data connection with up to 10 other devices simultaneously,
including devices that support WPS technology.
•
One-touch portable hotspot: Touch devices to start sharing your cellular connection over
Wi-Fi.
•
Bluetooth® tethering
: Share your cellular data connection with up to four other devices via Bluetooth®.
To Share Your Data Connection Using a USB Cable
1
Connect your device to a computer, using the USB cable that came with it.
2
From your Home screen, tap
3
Find and tap Settings > More > Tethering & portable hotspot.
4
Tap the USB tethering slider, then tap OK if prompted.
status bar once you are connected.
5
To stop sharing your data connection, tap the USB tethering slider or disconnect
the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
Downloaded from
ManualsNet.com
. The MAC address is displayed in the list.
, then tap Advanced > WPS Push Button, then press the WPS button on
> Advanced > WPS PIN Entry.
This is an Internet version of this publication. © Print only for private use.
search engine
.
.
.
.
47
is displayed in the
Advertisement
Table of Contents
