Table of Contents
Advertisement
Commissioning Through Deployment Wizard
6.3.2
1. Enter https://XX.XX.XX.XX in the address
box of the browser (XX.XX.XX.XX is the
default IP address of the SmartLogger). If
you log in to the WebUI for the first
time, a security risk warning is displayed.
Click Continue to this website.
2. Select a User Name to log in.
3. Click Deployment Wizard and set parameters as prompted. Click Skip for unused devices.
a. Set basic parameters.
b. Set wireless or wired network parameters based on the SmartLogger communication mode.
Parameter
Description
Language
Set this parameter as required.
User name
Select admin.
•
The initial password is
Changeme. Use the initial
password upon first power on
and change it immediately after
login. To ensure account
security, change the password
periodically and keep the new
password in mind. Not changing
the initial password may cause
password disclosure. A password
Password
left unchanged for a long period
of time may be stolen or
cracked. If a password is lost,
devices cannot be accessed. In
these cases, the user is liable for
any loss caused to the PV plant.
If you enter wrong passwords
•
for five consecutive times within
5 minutes, your account will be
locked out. Try again 10 minutes
later.
21
Advertisement
Table of Contents
