Huawei SUN2000-4.95KTL-NHL2 Quick Manual page 21

8
System Commissioning (SmartLogger Web)
6.3
1. The operating system of Windows 7 or later is supported.
2. The WebUI snapshots are for reference only, and the actual display may vary.
Preparations and WebUI Login
6.3.1
1. Connect the network cable between the network port of the PC and the WAN or LAN port of
the SmartLogger.
2. Set the IP addresses of the PC and SmartLogger in the same network segment.
IP Settings
Port
IP address
WAN port Subnet mask
Default gateway
IP address
LAN port Subnet mask
Default gateway
When the IP address of the WAN port is on the 192.168.8.1–192.168.8.255 network segment,
the IP address of the LAN port is automatically switched to 192.168.3.10, and the default
gateway is 192.168.3.1. If the connection port is a LAN port, adjust the network configuration
of the PC accordingly.
3. Set LAN parameters.
• If the SmartLogger is connected to a
local area network (LAN) and a proxy
server has been set, you need to cancel
the proxy server settings.
If the SmartLogger is connected to the
•
Internet and the PC is connected to the
LAN, do not cancel the proxy server
settings.
a. Open Internet Explorer.
b. Choose Tools > Internet Options.
c. Click the Connections tab and then click
LAN settings.
d. Clear Use a proxy server for your LAN.
e. Click OK.
SmartLogger Default Value
192.168.0.10
255.255.255.0
192.168.0.1
192.168.8.10
255.255.255.0
192.168.8.1
20
PC Setting Example
192.168.0.11
255.255.255.0
192.168.0.1
192.168.8.11
255.255.255.0
192.168.8.1