Advertisement
11. Menu Description
■ To use Virtual ODD, iso file must be located in the "_iso" folder of device.
■ Enter into or free from menu if Jog switch is pressed for 3seconds.
■ If backup button is pressed on Menu, it moves to 1 upper layer.
- Except Menu, Backup button is used for its original function, Data Backup.
■ External HDD or CD-ROM may not be recognized according to current mode states.
(1) Main Menu
Mode Select
> Device Mode setting
Setting
> Setting LCD brightness or Sleep Mode time
Information
> Check HDD information and firmware information
USB Connect
> Setting USB connection
Advanced
> Setting Virtual HDD mounting
Exit
(2) Mode Select ("ν"is shown in selected mode)
Dual Mode
ODD Mode
HDD Mode
(3) Setting
LCD Bright
> AdjustLCD backlight brightness
Idle Bright
> Adjust LCD backlight brightness in Sleep Mode
Standby time
> Sleep Mode time setting
Load Default
(4) Information
S.M.A.R.T
> Hard disk SMART information
HDD Model
> Display Hard disk model name
HDD Serial
> Display Hard disk serial number
Firmware Ver.
> Display device firmware version
USB Speed
> Display current PC connection
USB Input Volt
> Display the lowest Input Voltage (V) from USB port after
(5) S.M.A.R.T
HDD Temp.
> Display HDD temperature
HDD Health
> Display HDD health info (Good, Warning, Bad)
.COM
All manuals and user guides at all-guides.com
Menu Exit
Both of external HDD and CD-ROM are recognized
ExternalCD-ROM is recognized. (Useful when OS installing)
External HDD is recognized.
(Useful when connecting other devices except PC)
Return to default value
(USB2.0: Hi-speed, USB3.0: Super-speed)
connecting with PC
Display current Input Voltage (V)
- If Warning or Bad is shown, please check HDD carefully after
backup date.
4
Advertisement
