Md/Cd Unit (Xr-C5090 Only); Playing An Md/Cd - Sony XR-C5090 Operating Instructions Manual

Digital D-BASS
D-BASS 3
D-BASS 2
D-BASS 1
0dB
Frequency (Hz)
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
"D-BASS"* appears in the display.
To cancel, turn the control to the OFF position.
* If an optional CD changer has the Digital D-BASS
function, "DIGITAL D-BASS" appears on the display
during CD playback (XR-C5090 only).
Note
If the bass sound becomes distorted, adjust the D-BASS
control or the volume button.
EN
Attenuating the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons once more.
Note
If you connect an optional power amplifier to the LINE
OUT and do not use built-in amplifier, the beep tone will
be disabled.
10
Analog D-BASS
D-BASS 3
D-BASS 2
D-BASS 1
0dB
Frequency (Hz)
With Optional Equipment

MD/CD Unit (XR-C5090 only)

You can control two MD or CD units with this
unit.

Playing an MD/CD

Press (SOURCE) until the desired unit
indication appears on the display.
MD/CD playback starts.
When an MD/CD unit is connected, all the
tracks play from the beginning.
Note
Even if you select an MD unit, "CD" appears in the
display.
Selecting MD/CD units (when
several MD/CD units are connected)
Press (MODE) repeatedly to select the desired
MD/CD unit.
Changing the displayed items
Each time you press (DSPL) during MD/CD
playback, the item changes as follows:
Elapsed playback time
Disc and track number
Clock
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you wish
to skip.
SEEK
AMS
To locate the
preceding tracks
$
$
$
To locate the
succeeding tracks