Setting An Alarm; Time / Date; Backlight - Q Acoustics E120 User Manual

Setting an alarm

You can set two independent alarms on E120. Each alarm can be set to occur only once, weekdays,
weekends or all days. You can set the sound to a radio station or alarm, as well as set the duration and
volume.
1. Press ALARM.
2. Use >I to select Alarm 1 or Alarm 2 then press ENTER.
3. Press ENTER to turn alarm ON.
4. Use >I and ENTER to set all other settings such as the time, sound, volume etc.
Once an alarm is set and ON, you will see the status change on the standby screen.
The alarm will switch off after the duration period set, or simply put E120 into standby to switch off.

Time / Date

E120 will automatically set the time and date from the DAB or FM signal, but it can be adjusted manually
from the main menu:
1. Switch on E120.
2. Press MENU.
3. Select 'System Settings'.
4. Select 'Time/Date'.
5. Select 'Set Time/Date' to set.
6. Select 'Auto Update' to set auto updates from DAB, FM or none.
7. Select '12/24 Hour' to select either 12 or 24 hour time format.
8. Select 'Set Date Format' to adjust the day, month and year order.

Backlight

The E120 screen backlight is set to automatically adjust depending on the brightness of the room. You
can adjust the backlight setting via the main menu:
1. Switch on E120.
2. Press MENU.
3. Select 'System Settings'.
4. Select 'Backlight'.
5. Select 'Timeout' to set the number seconds the screen will stay 'On'.
6. Select 'On Level' to determine automatic or a set brightness level when the screen is 'On'.
7. Select 'Dim Level' to determine automatic or a set brightness level when the screen 'Dims'.
13