Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ARMTEL ARMT.665200.104UM
Summary of Contents for ARMTEL ARMT.665200.104UM
- Page 1 8 Fuse module ARMT.665200.104UM User Manual Document version 6 26.30.2 2021...
- Page 2 © Armtel info@armtel.com...
-
Page 3: Introduction
This User Manual is intended for introducing «8 Fuse module» ARMT.665200.104 manufactured by Armtel LLC, Russia and it is intended to familiarize the user with the device of the module and the procedure for its operation at the installation site. -
Page 4: Safety Provisions
It is forbidden to supply power to the 8 Fuse module simultaneously via the main and "phantom" power supply circuits of the product. The safety provisions relating to the specific operations outlined in this manual are indicated by the following sign: page 2/16 armtel.com © Armtel info@armtel.com... -
Page 5: Table Of Contents
3.2 Safety precautions ..............................13 3.3 Maintenance procedure ............................13 3.4 Checking the functionality of the product ....................14 4 REPAIR ....................................15 5 STORAGE .................................... 15 6 TRANSPORTATION ................................. 16 7 DISPOSAL ................................... 16 armtel.com page 3/16 info@armtel.com © Armtel... -
Page 6: Design And Description
8 Fuse module is designed for providing short-circuit protection for power supply outputs of digital intercom, Public address/General alarm communication systems DCN and IPN manufactured by Armtel. 8 Fuse module is designed for use in operational dispatch systems, loudspeaker communication in metallurgical, chemical, nuclear (including nuclear power plants), oil refining, gas, and oil-producing industries and similar to them in terms of application, as well as on railways. -
Page 7: Specifications
* It is allowed to use fuses of the power supply line with a nominal value of up to 3 A. ** Compliance of the product with safety class 4N according to NP-001-15 is allowed. armtel.com page 5/16 info@armtel.com © Armtel... -
Page 8: Scope Of Supply
Product Passport ARMT.665200.104PP User Manual ARMT.665200.104UM 8 Fuse module is a printed board with clamping elements for DIN-rail 35/7,5, mounted at racks or cabinets in accordance with DIN 41494 (see Figure 2). Eight fuses are located at the board to provide protection from short-circuit of 8 power lines and both central and subscriber exchanges, intercom and control panel equipment, four terminal blocks Х1…Х4,... - Page 9 X3 terminal block. 8 Fuse module can perform the following functions within the digital intercom DCN and IPN communication systems manufactured by Armtel: Transmission of the input power voltage of 48V DC from X4 terminal block «POWER INPUT»...
- Page 10 (a lamp, a siren etc.); generate a failure alarm «Alarm» to X3 terminal block of the main module in one or several back-up 8 module(s) connected to X3 terminal block of the main module. page 8/16 armtel.com © Armtel info@armtel.com...
-
Page 11: Marking
commercialization mark for products on the market of Customs Union member states; mark III electrical safety class according to GOST IEC 61140-2012; special waste disposal mark; product serial number; date of manufacture. The serial number is unique for each product. armtel.com page 9/16 info@armtel.com © Armtel... -
Page 12: Package
8 Fuse module from the manufacturer, consumer package contents are placed in the package place, which ensures protection from mechanical damage, direct ingress of atmospheric precipitation, dust, and solar radiation during transportation page 10/16 armtel.com © Armtel info@armtel.com... -
Page 13: Intended Use
(instructed) in the operation of products of Armtel LLC. The main preparation of the product for use is carried out during installation and connection. Preparation of 8 Fuse module for work includes several activities: 1. -
Page 14: Safety Measures When Using The Product For Its Intended Purpose
«Alarm» signal is not connected to Х3 terminal terminal blocks at both the shaped at the main module. block of the main main and backup modules. module. page 12/16 armtel.com © Armtel info@armtel.com... -
Page 15: Maintenance
check that the wires and cables are properly connected to the terminal blocks. Verify that the wires and cables are not tensioned; check the status of the signaling elements. The approximate time for maintenance and servicing is 30 min. armtel.com page 13/16 info@armtel.com © Armtel... -
Page 16: Checking The Functionality Of The Product
8 FUSE MODULE User Manual 3.4 Checking the functionality of the product The supply voltage for the subscriber equipment can be checked in its normal operation. page 14/16 armtel.com © Armtel info@armtel.com... -
Page 17: Repair
+ 5 °C to + 40 °C. There should not be any aggressive impurities in the air of the product storage room (vapors of acids, alkalis). armtel.com page 15/16 info@armtel.com © Armtel... -
Page 18: Transportation
The product is not to be disposed of together with household waste and should be delivered to a specialized center for the disposal of electronic products. The operating organization must take full responsibility for the product disposal. page 16/16 armtel.com © Armtel info@armtel.com... - Page 19 © Armtel...
- Page 20 ARMTEL LLC Tel./fax: +7 (812) 703-41-11 www.armtel.com | info@armtel.com Legal and physical address: 12 buildung 1, Zaporozhskaya street, office 1/2, Saint Petersburg, 192012 TECHNICAL SUPPORT 8-800-500-90-17 (for calls from Russian Federation) +7-812-633-04-02 (for international calls) support@armtel.com MORE INFORMATION ABOUT PRODUCT ON OFFICIAL SITE...
Need help?
Do you have a question about the ARMT.665200.104UM and is the answer not in the manual?
Questions and answers