Table of Contents
Advertisement
Pull the backup battery holder out of the left
0
side.
Set the new lithium battery (type CR1220 or
0
equivalent) in the holder, positive side up,
and replace the holder.
Important!
A
battery pack should be installed on the
transceiver when replacing the backup bat
tery, to avoid loosing data in memories .
Resetting the CPUs clears all memories, repeater shifts and other settings to their defaults, and leaves
the transceiver CPUs in the same state as when the set left the factory.
To reset the CPUs, hold both the MR button and REV key while turning the transceiver on ("soft reset").
If you still have a problem, remove thboth the battery pack (or external DC power supply) and the
Lithium backup battery, and let the transceiver set for at least 30 seconds.
FT-530 Technical Sup plement
Lith ium battery
/
Y AESU
09000573
P
N :
Advertisement
Table of Contents
