Pump Cleaning - ProMed 5040-SX2 Instruction Leaflet

S
PeCIaL QUaLIty FeatUreS
Keypad:
Extremely easy to use, select all functions by pressing the correspon-
ding key on the keypad.
LED-Display: The large, easy-to-read display provides all the
information about speed or power spray at a glance.
Operating hours indicator
The operating hours indicator allows you to determine the
operating time of the device.
Abrasive product recommendation:
The abrasive product recommendation of the device indicates
which maximum speed is to be worked with for which milling
head diameter.
Quick chucks:
For the absorption of the abrasives, the quick chuck enables you a
simple, fast and smooth change of the grinders. Once the abrasive
body begins to rotate, the shaft is automatically locked.

Pump cleaning:

If work has been carried out for a period of more than
one hour with the spray function switched off, the device
automatically activates the pump cleaning. This process is
shown on the display and usually takes 2 - 3 seconds.
Automatic nozzle cleaning:
While switching on the device, it first blows the air from the nozzle
and then removes the dirt. While shutting off the device, the spray
pumps runs for few seconds more around the nozzle to clean hose
system.
Overload protection for motor hand piece
The unit is equipped with overload protection for the hand
piece. In case of any blockage or strain of the hand piece,
the engine and micro pump turns off for approx. 5 seconds.
Maintenance-free, brushless high-performance
micromotor:
The brushes in conventional motors are subject to constant wear
Kaitstud / Secured by https://mereneid.eu/
and tear until contact finally breaks down altogether, necessitating
repairs. Brushless motors are maintenance-free and also offer
approx. 20 % better performance than motors of a comparable
size that use brushes.
DE
EN
FR
IT
ES
PT
PL