Subscribe to Our Youtube Channel
Related Manuals for Vogue WALL UNIT 600 Tall Adjustable Corner
Summary of Contents for Vogue WALL UNIT 600 Tall Adjustable Corner
- Page 1 WALL UNIT 600 Tall Adjustable Corner Assembly Guide For Internal Use:FI.WR.INS.048_WKIN00133_Wall_600_AdjCnr_Tall.Rev8...
- Page 2 WALL UNIT 600 Tall Adjustable Corner Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel A Panel B Panel C Loose Shelf Blanking Panel Frontal x1 Back Panel x2 End Panel x2 Base Panel (packed separately)
- Page 3 Step 1. Seat dowel (F) into holes in Step 2. end panel (B) as Seat (G) Seat cam dowel (G) cam dowel shown. into holes in into hole as shown. end panel (B) as shown. Step 3. Attach panels x2 (C) to panel (B), using cam dowels (G) (in blue) and also using dowels (F) (in orange) in...
- Page 4 WALL UNIT 600 Tall Adjustable Corner Assembly Guide Step 6. Seat dowel Step 7. (F) into holes in Seat cam dowel (G) both end panels into holes in both end (B) as shown. panels (B) as shown. Seat (G) cam dowel into hole as shown.
- Page 5 Step 10. Ensure unit is square. From Top 94mm 126mm Step 11. Slide the back panel clips (T) into the groove of both panels (B). The back panel clips (T) should be evenly spaced as shown and positioned to allow the hanging bracket and corner gussets to be fitted. Onceinplace,tightenscrew.
- Page 6 WALL UNIT 600 Tall Adjustable Corner Assembly Guide Screws for attaching to walls are not provided as these vary depending on materials, thicknessandconstruction.Ensureappropriatefixingsforwallconstructionareused. Care to be taken. Hanging procedure is necessary for a safe installation. Detail A Detail A Detail A Step a Step b Step c...
- Page 7 Step 16. Measure appropriately and attach the 2 x hanging bracket Hanging Bracket plates onto the wall screwing Plate through the provided holes into your wall. Step 17. Hang the unit using the brackets to hook onto the plate as shown Step 18.
- Page 8 WALL UNIT 600 Tall Adjustable Corner Assembly Guide Adjustable Corner Post Pack Step 20. Panel X Attach panel (X) to panel (Y) using appropriate fixing. Panel Y Adapt panels (X) & (Y) where applicable to suit Customer Specific Kitchen Plan. Step 21.
- Page 9 Step 23. Insert hinge in top & bottom holes as shown below. Step 24. Secure hinges by tightening 2 x screws with hinge dowels attached. These are already positioned within the hinges. Step 25. Attach the door to unit where required. To attach door, clip hinge onto hinge plate and click to secure.
- Page 10 WALL UNIT 600 Tall Adjustable Corner Assembly Guide Page 9...
- Page 11 For Internal Use: FI.WR.INS.048_WKIN00133_Wall_600_AdjCnr_Tall.Rev8 Page 10...
Need help?
Do you have a question about the WALL UNIT 600 Tall Adjustable Corner and is the answer not in the manual?
Questions and answers