Advertisement
The "Dosimeter" Tab
1) Your Apollo application may present a "Dosimeter" tab. This tab can be used to monitor and record
both the dose and irradiance over time and mimics the device dosimeter usage without a computer.
While the Apollo device is sampling the light at several kilohertz, the Meter tab will request an update on
all presented data, from the device, at an interval of approximately 5 seconds.
WARNING: Do not use the Start/Stop button on the Apollo device when using this feature. Use the on-
screen Apollo app controls to interact with the Apollo device.
Status bar
% of Target Dose
Start/Stop Recording to File
(CSV formatted data is stored at MyDocuments\L and M Instruments\Reports)
Copyright© 2022 L and M Instruments LLC
Apollo Quick Start Guide
Advertisement
