Advertisement
The "Info" Tab
1) Your Apollo application may present an "Info" tab. This lists information about this specific Apollo
device as well as configuration information. An example is provided below.
Key Feature:
The Info tab can be used to read the most recently competed dose (units are in J/cm2). This allows a
higher level of precision beyond the 0-100% displayed on the device's LEDs. Typical precision dose process: (1)
ensure the unit is programmed with Target (100%) Dose above the dose being collected; (2) with Apollo
disconnected from the computer press the Start/Stop button; (3) place Apollo in the area of interest for dose
collection; (4) press the Start/Stop button when dose is complete; (5) attach to the computer and, from the Info tab,
select "Reload from Device" and note the "Last Dose" value.
Copyright© 2022 L and M Instruments LLC
Apollo Quick Start Guide
The min and max
irradiance levels that
can be sensed by this
particular device
Advertisement
