Advertisement
Apollo Modes (Stand-Alone and Computer-Controlled)
Apollo can run in two modes as follows:
Stand-Alone Mode
In this mode, the unit is used without a PC as described in the Dose Indicator section above. When using
this mode, the Start/Stop button is used to start and stop the dose accumulation and the Apollo LED's
provide the dose feedback.
Computer-Controlled Mode
In this mode, a custom USB cable (APOLLO-LP-2-CBL-01) is used to connect Apollo to a Windows PC. In
this mode, the Apollo device is controlled by the Apollo app running on the PC. The Apollo app will
present one or more tabs, with each tab providing additional functionality as described below.
WARNING: When running in Computer-Controlled Mode, do not use the Start/Stop button on the
Apollo device. In this mode, use the on-screen Apollo app controls to interact with the Apollo
device.
Copyright© 2022 L and M Instruments LLC
Apollo Quick Start Guide
Advertisement
