Sirius Satellite Radio XMp3i User Manual page 28

Sirius satellite radio satellite radio user guide
Hide thumbs Also See for XMp3i:
Table of Contents

Advertisement

Home Dock Installation
signal strength, make small adjustments to the angle of tilt of the clamshell until
the highest possible signal strength is achieved . If you have not wall-mounted
the antenna, turn the antenna slightly to the right or left and observe if the
signal strength increases . For each tweak, allow a few seconds in each position to
determine if the signal strength increases .
If the signal reception is good, but there is no audio, verify your audio connection .
• If you are connected to a home stereo system, be sure the system is set to
the auxiliary input source, and you have connected the Stereo Audio Cable
to the auxiliary input connectors .
• If you are connected to powered speakers, be sure the speakers are
plugged into an outlet, and are turned On .
The Line Out level of your Radio can also be increased . Refer to "Line Out Level"
on page 93 .
28
SOUTH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xpmp3h1

Table of Contents