Manual Tuning; Direct Access Tuning; Scan Tuning - Jensen MSR4500 Owner's Manual

Satellite Operation
(continued)

Manual Tuning

Use manual tuning to move through channels one at a time in either direct or category mode.
Direct Mode
Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel.
Category Mode
Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel.
Note: In category mode, manual tuning is only used to select a channel within the current
category. Manual tuning cannot be used to change categories. Use seek tuning to select a
different category.

Direct Access Tuning

In direct mode, channels can also be accessed directly by channel number. Press SEL (also the
Scan button), then enter the desired channel number using the number buttons (0-9).
Note: Direct access is used in direct mode only. There is no direct access in category mode.

Scan Tuning

In direct mode, the scan function will scan up through all channels sequentially and provide five
seconds of listening time before moving to the next channel. Press SCAN for more than three
seconds to activate the scan function. While scanning, press SCAN momentarily to stop scanning
and listen to the selected channel.
Note: Scan tuning is used in direct mode only. There is no scan tuning in category mode.
Tuning Method
Tune quickly up or down through
Seek Tuning
available channels
Tune up or down through all available
Manual Tuning
channels one at a time
Tune directly to a channel by entering
Direct Access Tuning
the channel number
Tune up through all channels
sequentially, providing five seconds of
Scan Tuning
listening at each channel
Tuning Options
Direct Mode Category Mode
Tune quickly up or down through
available categories
Tune up or down through all available
channels within the current category
one at a time
Satellite Operation
Manual Tuning
Use manual tuning to move through channels one at a time in either direct or category mode.
Direct Mode
Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel.
Category Mode
Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel.
Note: In category mode, manual tuning is only used to select a channel within the current
category. Manual tuning cannot be used to change categories. Use seek tuning to select a
different channel.
Direct Access Tuning
In direct mode, channels can also be accessed directly by channel number. Press SEL (also the
Scan button), then enter the desired channel number using the number buttons (0-9).
Note: Direct access is used in direct mode only. There is no direct access in category mode.
Scan Tuning
In direct mode, the scan function will scan up through all channels sequentially and provide five
seconds of listening time before moving to the next channel. Press SCAN for more than three
seconds to activate the scan function. While scanning, press SCAN momentarily to stop scanning
and listen to the selected channel.
Note: Scan tuning is used in direct mode only. There is no scan tuning in category mode.
Tuning Method
Seek Tuning
Manual Tuning
Direct Access Tuning
N/A
Scan Tuning
N/A
12
(continued)
Tuning Options
Direct Mode
Tune quickly up or down through Tune quickly up or down through
available channels available categories
Tune up or down through all available Tune up or down through all available
channels one at a time channels within the current category
one at a time
Tune directly to a channel by entering
N/A
the channel number
Tune up through all channels
sequentially, providing five seconds of
N/A
listening at each channel
MSR4500
Category Mode