Yamaha MT-10 2021 Owner's Manual page 41

Fuel consumption trip meter:
1
FUEL CON
4.9
FUEL CON GAL
1. Display in STREET MODE
2. Display in TRACK MODE
Displays how much fuel has been con-
sumed since the trip meter was last re-
set.
TIP
The current fuel consumption function
should be used for general reference
only. Do not use this figure to estimate
the distance that can be traveled on the
current tank of fuel.
To reset information display items
1. Use the wheel switch to scroll
through the display items until the
item you want to reset appears.
2. STREET MODE: Short push the
wheel switch and the item group
will flash for 5 seconds. If both
2
items in the group are resettable,
the top item will flash first. Scroll
4.9
down to select the bottom item.
GAL
TRACK MODE: Short push the
wheel switch and the information
display will flash for 5 seconds.
3. While the item is flashing, long
push the wheel switch and the item
will reset.
Grip warmer indicator (if equipped)
The grip warmers can be used when
the engine is running. There are 3 cus-
tomizable temperature presets that can
be customized between 10 different
temperature levels (See "Grip Warmer
Setting"5-24).
The indicator displays the current tem-
perature setting as "OFF" or segments
(LO/MIDDLE/HIGH).
To activate the grip warmer
1. Use the wheel switch to highlight
the grip warmer display with the
cursor.
2. Short push the wheel switch and
Instrument and control functions
NOTICE



YRC icons
The current YRC MODE preset and its
related settings are shown on various
icons at the top and bottom of the main
screen.
Settings for YRC items PWR, TCS,
SCS, QS "
BC "
(MODE-A, MODE-B, MODE-C, and
MODE-D). The settings for each
MODE preset can be customized via
5-13
the indicator will start flashing.
3. Rotate the wheel switch to select
the temperature preset.
4. Short push the wheel switch to
confirm the selection and the grip
warmer indicator will stop flashing.
Be sure to wear gloves when us-
ing the grip warmers.
Do not use the grip warmers in
warm weather.
If the handlebar grip or throttle
grip becomes worn or damaged,
stop using the grip warmers and
replace the grips.
", QS " ", LIF, EBM, and
" are organized into presets
1
2
3
ECA17932
4
5
6
7
8
9
10
11
12
13