Product Features - BMW Advanced Car Eye 3.0 Pro Instructions For Use Manual

Activating ETC product (only
available in China)
Product registration and activation works
only in the ETC app and is only applicable
to users using the product in China.
1. Download and install the ETC app on your
smartphone.
2. Touch e高速App > ETC网厅 > ETC免费
and follow the in-app instructions to register
user information.
3. When following the instructions, press and
hold the Bluetooth ( ) and the microphone
button ( ) on the product simultaneously
during the ETC activation step to complete
activation and registration.
10

Product features

The BMW Advanced Car Eye 3.0 Pro monitors
the vehicle both as you drive and when it is
parked. Intelligent sensors enable the camera to
record risky traffic situations, (attempted) break-
ins and accidents.
Driving mode
When the vehicle is started, the status LED
will turn on in combination with a voice
announcement. Driving mode will be activated.
–
Continuous recording: While driving, videos
are recorded in 1-minute segments and
stored in the "DRIVING" folder. You can
also check the recordings on the LCD
touchscreen by selecting Recordings >
Driving.
–
Incident recording: When an impact to the
vehicle is detected, the video recording
will be started from 10 seconds before to
50 seconds after the incident and is stored
in the "INCIDENT" folder. You can also check
the recordings on the LCD touchscreen by
selecting Recordings > Driving Events.
You can choose between continuously
recording and incident recording.
Please check the current laws in the
country in which the ACE 3.0 and app is
intended to be used. Check out whether
and how its use is legal or not and comply
with the legal regulations.
Parking mode
When the engine is turned off the product
automatically switches to Parking mode after the
Exit phase time has elapsed.