Advertisement
Quick Links
BP 994
ASTRO TRAVEL COT
BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND THE
INSTRUCTIONS. INCORRECT ASSEMBLY MAY MAKE THE COT
UNSAFE.
DO NOT USE THIS COT IF ANY PART IS BROKEN, TORN OR
MISSING. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR
FUTURE REFERENCE.
WARNING· RECOMMENDED MATTRESS SIZE
690 mm Wide x 1040 mm Long x No more than 20 mm Thick
Using the wrong size mattress may create hazardous gaps that could result in
suffocation or could reduce the side height of the cot which may result in your
child falling out from the cot.
DO NOT ADD AN EXTRA MATTRESS AS THIS MAY CAUSE SUFFOCATION
Advertisement
Related Manuals for Love N Care BP 994
Summary of Contents for Love N Care BP 994
- Page 1 BP 994 ASTRO TRAVEL COT BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND THE INSTRUCTIONS. INCORRECT ASSEMBLY MAY MAKE THE COT UNSAFE. DO NOT USE THIS COT IF ANY PART IS BROKEN, TORN OR MISSING. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
-
Page 2: Care And Maintenance
Never leave children unattended. Do not leave anything in the cot such as toys that provide a foothold to enable the child to climb out of the cot. Do not use the cot near naked heat sources, bar heaters, open fires, or exposed flames. - Page 3 Parts INSTRUCTIONS FOR ASSEMBLY AND LOCKING PROCEDURES 1) Unzip then remove carry bag and mattress base by unfastening the Velcro straps. Remove the travel cot. 2) Widen the four legs. 3) Ensure the base in completely lifted, then starting with the shorter sides, pull up each rail to lock in place.
- Page 4 To Open the Cot Remove the cot from the carry bag. Release the velcro™ tabs on the mattress and set it aside Separate the four corner posts enough to be able to grip the centre joints of the side and end rails. Lift the side and end rails up sharply until they are firmly locked in place.
- Page 5 Position the flap over the lock and fasten it with the velcro™ fastener. Place the mattress in the cot with the padded side on top. Thread the velcro ™ tabs attached to the mattress, through the slits in the base of the cot and secure to the underside of the cot to hold the mattress firmly in place.
- Page 6 TO REMOVE THE BASSINET Remove the mattress from the bassinet. Release the plastic anchor moldings from the cot comer moldings and lift the bassinet from the cot. Depress the spring loaded buttons holding the mattress support tubes together and separate the tubes and remove them from the sewn pockets. TO FOLD THE PORTABLE COT Remove the mattress and set it aside.
- Page 7 TO INSTALL CHANGE TABLE (If Supplied) Insert the change table tube Insert the tube to another the change table travel cot to the change table fabric until button springs out. and make the hook seize up the rail Travel cot with Changer attached Zip on nge table to travel cot...
- Page 8 Contact Us: Love N Care Pty Ltd. 297-299 Canterbury Rd, Revesby NSW 2212 Australia Contact No: 02 9774 4655 Fax: 02 9774 4633 Email: info@lovencare.com.au Website: www.lovencare.com.au...