Related Manuals for Love N Care Montana
Summary of Contents for Love N Care Montana
- Page 1 BP 894 montana highchair IMPORTANT! BEFORE ASSEMBLING THIS COT, READ AND UNDERSTAND THE INSTRUCTIONS. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
- Page 2 Congratulations on purchasing your new Love N Care Montana Highchair In under an hour you should be able to have this one of kind highchair ready to meet your beautiful child :)
- Page 3 Before assembling this highchair read and understand the instructions. Incorrect assembly may make the highchair unsafe. Do not use this highchair if any part is broken, torn or missing. Keep these instructions in a safe place for future reference. WARNING! FALL HAZARD •...
- Page 4 • Keep the highchair away from open fire, heaters and other source strong heat. Always use the safety harness. • Always be sure your child is clear of the highchair’s moving parts before making adjustments. • Check the highchair regularly for damage and to ensure that the harness is secure and performs correctly.
- Page 5 Parts ( 1) ( 2) 1. Backrest adjuster ( 3) 2. Shoulder strap holes ( 4) 3. Seat pad hook ( 5) 4. Height adjuster button ( 6) 6. Folding button 7. Tray hooks ( 7) 8. Rear Legs ( 8) ( 9) 9.
- Page 6 Assembly Opening the Highchair Press on the Folding buttons (6) whilst at the same time you pull the front legs (15) and rear legs (8). Then pull the back of the seat to the required position.
- Page 7 Assembly Assembling the tray Handle Pull the handle located under the tray shelf, then insert the tubes on the ends of the tray into the housing ends. Slide the tray forwards and backwards to ensure that the tray is installed correctly.
- Page 8 Assembly Remove/unlocking the tray side button to unlock tray Slide the tray to the last position (with the red mark) and press the side button to unlock the safety catch, then slide the tube out completely. Repeat for the other side. The tray can be placed on the back legs of the highchair by attaching them on the hooks.
-
Page 9: Seat Height Adjustment
Assembly Seat Height Adjustment Whilst holding the 2 handles, press the height adjuster button (4) to lower the seat. The seat has 6 different positions. -
Page 10: Backrest Adjustment
Assembly Backrest Adjustment WARNING: The upright position is suitable for children from 6 months Press the backrest adjuster button (1) to recine the seat up or down. This seat has 5 positions for backrest recline. - Page 11 Assembly Footrest Adjustment (length) (12) (12) Press the small buttons (12) on the footrest sides and pull the footrest to the desired position. The footrest has 3 positions.
-
Page 12: Footrest Adjustment
Assembly Footrest Adjustment (11) (11) Press the large buttons (11) on both sides of the footrest and pull the footrest up or down. The footrest has 3 positions of adjustment. -
Page 13: Harness Assembly
Assembly Harness Assembly WARNING: USE THE HARNESS AT ALL TIMES Familiarise yourself with all components of the 5 point harness. Place the child into the highchair and place the shoulder straps over the childs shoulders. adjust the sliders until they are tight enough to keep the child inthe seat. - Page 14 Assembly 1. Place the seat into the lower position 2. Press on the main folding button (6) then close the 2 legs. 3. place the tray on the rear legs.
-
Page 15: Warranty Against Defects
IF YOU ARE UNABLE TO RETURN THE ITEM TO THE STORE OF PURCHASE, YOU CAN CONTACT LOVE N CARE ON FREECALL 1300732599. WE WILL THEN ORGANISE FOR EITHER SOMEBODY TO INSPECT THE ITEM OR ARRANGE FOR A COURIER TO PICK IT UP AND RETURN IT BACK TO YOU. BP 894 MONTANA HIGHCHAIR... - Page 16 Contact Us Head Office: Love N Care Pty Ltd. 297-299 Canterbury Rd, Revesby NSW 2212 Australia Contact No: 02 9774 4655 Fax: 02 9774 4633 Email: info@lovencare.com.au Website: www.lovencare.com.au...