Download Print this page

Advertisement

Quick Links

BP 950
Glide Sleeper
Instruction Manual

Advertisement

loading

Summary of Contents for Love N Care BP 950

  • Page 1 BP 950 Glide Sleeper Instruction Manual...
  • Page 2: Warranty Against Defects

    Love N Care on free call 1300 732 599. Where you send the product directly to the manufacturer then you may be liable for the costs of transportation to and from Love N Care. Love N Care will meet the reasonable expenses incurred by a consumer in a making a warranty claim.
  • Page 3 LOVE N CARE...
  • Page 4: Parts List

    Parts List End Supports Basket Frame with Dressing Legs Bed Straps Mattress...
  • Page 5 Assembly 1. Connect all 4 legs to both of the end supports. 2. Connect the 2 end support units together sing the round bars 3. Feed the basket bars through the fabric and connect them to the end support units.
  • Page 6 4. Line the frame up with the support unit. 5. Sit the frame onto the clips coming up from the end support units. 6. Pres in the locking clip in order to connect the frame to the support units on both sides. 7.
  • Page 7: Adjusting The Height

    Adjusting the Height A. Release the lever on both sides of the crib. B. Lift up or let down the height of the crib unit. This can also be angled to help with reflux. Co-Sleeping Mode A. Lower the zip on the inside of the crib on both sides to the bootom. B.
  • Page 8 Co-Sleeping Mode D. Adjust the height of the crib so the top of the lowered section is below or in line with the top of your mattress. WARNING - Co-Sleeping mode should not be used if the adult mattress is lower in height than the lowest section of the dropped side of the crib. E.
  • Page 9 Attaching to Adult bed for Co-Sleeping Mode With the crib rail in the lower position, place the crib close to the bed. Check the height of the sleeper against the height of the bed. The height of the open side edge of the crib should always be aligned with or lower than the height of the bed mattress.
  • Page 11 Using the control Panel...
  • Page 12 Contact Us Head Office: Love N Care Pty Ltd. 297-299 Canterbury Rd, Revesby NSW 2212 Australia Contact No: 02 9774 4655 Email: info@lovencare.au Website: www.lovencare.au...