Removing The Cartridge Group; Fig. 27: Moving Out Cartridge Group 1; Fig. 28: Moving Out Cartridge Group 2 - ABB Power 845-M Operation Manual

Operation Manual / Power2 845-M / High-pressure stage
9 Disassembly and assembly / 9.7 Removing the cartridge group
9.7

Removing the cartridge group

Fig. 27: Moving out cartridge group 1
1. Remove the O-ring (42010).
2. Loosen and remove the screws (42099).
3. Fit bracket (90030) and fit swivel lifting eye (90657) to cartridge group with
screws (90900).
4. Move in one plate (90031).
5. To secure, fit plate (90032) with screw (90656) and nut (90415).
6. Secure lifting gear to swivel lifting eye (90657).
Fig. 28: Moving out cartridge group 2
7. Evenly press off cartridge group by screwing three press-off screws (90901) into the des-
ignated holes.
8. Carefully move out cartridge group.
© Copyright 2022 ABB. All rights reserved. HZTL4069_EN Rev.F March 2022