Page 2
Do not use a power supply other than the provided manufacturer power supply. Failure to do so may cause unit failure and/or damage. Special Announcement: This manual is for reference only. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks are the properties of Amcrest Technologies LLC.
Table of Contents Product Overview Features Typical Application Device Structure 4-Port PoE Switch 2.1.1 Front Panel 2.1.2 PoE Power Output 2.1.3 Back Cover 8-Port PoE Switch 2.2.1 Front Panel 2.2.2 PoE Power Supply 2.2.3 Back Cover 8-Port PoE Switch 2.3.1 Front Panel 2.3.2 PoE Power Supply 2.3.3 Back Cover Installation Guide...
All models support self-adapt MDI/MDIX mode. Self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard. Support DC48-57V power supply. Individual Features: 4 Port Model (AMPS4E4P-AT-60) 4-port PoE switch, 4*100Mbps/ self-adaptive PoE ports and 1*10/100M Uplink RJ45 ports. Total PoE power consumption of 60W. 8 Port Model (AGPS8E8P-AT-60) 4-port PoE switch, 4*10/100/1000 Mbps self-adaptive PoE ports and 4*10/100/1000Mbps self-adaptive Non-PoE ports.
2.2 8-Port PoE Switch (AGPS8E4P-AT-60) 2.2.1 Front Panel The front panel is shown in Figure 2-2. Link/Act PoE Link/Act PoE Link/Act PoE Link/Act PoE Link/Act Link/Act Link/Act Link/Act PoE 1 PoE 2 PoE 3 PoE 4 Figure 2.2 Name Note Link/Act, PoE Single port link / single port PoE status indicator light.
Need help?
Do you have a question about the AMPS4E4P-AT-60 and is the answer not in the manual?
Questions and answers