Table of Contents
Advertisement
Logging in through Telnet
You can use the following default settings to log in to the web interface
through HTTP:
Username—admin
•
Password—admin
•
IP
address
•
switch—192.168.0.100/24.
If you do not want to use the default login information, you can also log
in to the wireless switch by following these steps:
Log in to the wireless switch through the console port, enable the Telnet
1.
function, and set user privileges.
Specify an IP address for VLAN-interface 1 of the wireless switch.
2.
Connect the PC to the Ethernet port (by default, the Ethernet port belongs
3.
to VLAN 1) on the wireless switch.
Logging in through the web interface
You can use the following default settings to log in to the web interface
through HTTP:
Username—admin
•
Password—admin
•
IP
address
•
switch—192.168.0.100/24.
If you do not want to use the default login information, you can also log
in to the wireless switch by following these steps:
Log in to the wireless switch through the console port, enable the web
1.
function, and set user privileges.
Specify an IP address for VLAN-interface 1 of the wireless switch.
2.
Connect the PC to the Ethernet port (by default, the Ethernet port belongs
3.
to VLAN 1) on the wireless switch.
of
VLAN-interface
of
VLAN-interface
37
1
on
the
1
on
the
wireless
wireless
Advertisement
Table of Contents
