Table of Contents
Advertisement
28
Calling
Direct call
If this is active, only one number can
be dialled.
Switch on
¢
¢
Security
C
T
Enter phone code.
J
Confirm.
C
When first prompted you define and
enter the phone code (4 to 8 digits).
Please do not forget this code
(p. 17)!
Confirm message.
C
Select phone number
/
Ï
J
from the Phonebook/
Addressbook or re-enter it.
Confirm.
C
Apply
The dial the phone
§Carol§
number (e.g. "Carol") press
and hold the right soft key.
Switch off
Press and hold.
#
Enter phone code.
J
Confirm input.
C
¢
Direct call
Tone sequences (DTMF)
You can, for example, enter tone
sequences (digits) for remote access
to an answering machine while
another connection exists. These
entries are transmitted directly as
DTMF codes (tone sequences).
Open menu.
§Options§
Send DTMF
Select.
Using the Phonebook/
Addressbook
Store phone numbers and tone
sequences (DTMF tones) in the
Phonebook/Addressbook in the
same way as a normal entry.
Enter phone number.
J
Press until a "+" appears in
0
the display (wait for the
connection to be estab-
lished).
Enter DTMF tones (digits).
J
If necessary, wait again
0
for three seconds at a
time for the receiver to
process the entries cor-
rectly.
Enter a name.
J
Store entry.
§Save§
You may also store just the
DTMFtones (digits) and then send
them during the call.
Advertisement
Table of Contents
