Siemens C45 User Manual page 69

Î
Î
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
data communication/fax communi-
cation must be available on your PC
and there must be a connection to
the phone.
Fax and data services must be ena-
bled by the service provider. Differ-
ent networks support different types
of fax/data reception, contact your
service provider for details.
Your service provider has given you a
number for telephoning and a fax/da-
ta number.
Start your PC communication pro-
gram and enter the required destina-
tion phone number in the program.
The call is signalled by a special ring-
er and the type (fax or data) is
displayed.
Now start the communication pro-
gram in your PC to receive the
fax/data.
Set this function on the phone
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up,
the following soft key is available for
two seconds:
Q
( if a special fax or data number
is available)
Start the required communication
program in your PC and switch on
the function at the phone
call (the PC accepts the connection).
End transmission with PC software
and/or press
Î
Î
Î
Switch to
mode. You may now
send a fax.
Î
Î
Î
.
Q
the