Kenmore Lift-Up DU5080 Use & Care Manual page 9

NOTE:
DO NOT tilt the wand to insert it
into the nozzle neck.
DO NOT insert the wand before placing
the body onto the nozzle.
4. Insert the hose into body until you hear
a 'click'.
5. Make sure the upper cord hook is in
the proper position as shown. Wrap the
power cord loosely around the upper
and lower cord hooks.
ASSEMBLY INSTRUCTIONS
- 9 -
NOTE:
Make sure to wrap the power
cord around the upper cord hook first, and
then around the lower cord hook to avoid
damaging the power cord.
6. Lock power cord plug onto the power
cord.
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly with
excessive stress on the cord may cause
cord damage. A damaged cord is an
electrical shock hazard and could cause
personal injury or damage.
Upper
Cord
Hook
Power Cord
Plug
Power Cord