Evolite EVO SPARK 600 User Manual page 9

o DMX mode
Each fixture can be controlled individually using a standard DMX-512 controller.
Each device must be "addressed" using the "DMX address" menu. The address entered is then the base address, the
address from which the device will respond.
The DMX controller used will need 2 DMX channels to control the EVO SPARK 600.
The First Chanel
0-10
11-220
221-239
240-255
The Second Chanel
0-15
16-63
64-111
112-159
160-207
208-255
o DMX 512 connection
The wires must not come into contact with each other, otherwise the fixture will not work at all or properly. Please note the starting
address depends upon which controller is being used. Only use a DMX cable and 3-pin XLR-plugs and connectors in order to connect
the controller with the fixture or one fixture to another
Connection with the mains.
HAZEBOX 1500 Manual Ver. 1.00
Function
Pre-heat off
Emergency stop
clear Powder
Pre-heat on
Function
Turn off
Spark Height 1
Spark Height 2
Spark Height 3
Spark Height 4
Spray Height 5
Digital Tube Display
E57
CLE
(Important: Please clear machine powder
after each time use, this improves machine's
life-span)
OFF
F1
F2
F3
F4
F5
Page 9