Jeep Patriot 2014 Service Information page 32

Hide thumbs Also See for Patriot 2014:

2014 SUSPENSION Tires & Wheels - Service Information - Compass & Patriot

the head of the changer (located at 1) in a clockwise direction before

rotating the wheel (also in a clockwise direction) to mount the tire. Use

this procedure on both the outer and inner tire beads.

1 - HEAD OF CHANGER LOCATED HERE

2 - VALVE STEM

Fig. 23: Mounting Tire Using Rotating Tool Machine

Courtesy of CHRYSLER GROUP, LLC

b. Rotating Tool Tire Changers - Position the wheel on the changer so that

the sensor valve stem (1) is located approximately 210° clockwise from

the installation end of the mounting/dismounting tool (2) once the tool

is mounted for tire installation. Make sure the sensor is clear of the

lower bead breaker area (3) to avoid damaging the sensor when the

breaker rises. Rotate the tool (2) in a counterclockwise direction to

mount the tire. Use this procedure on both the outer and inner tire

beads.

1 - VALVE STEM

2 - INSTALLATION END OF MOUNTING/DISMOUNTING

TOOL

3 - BEAD BREAKER (KEEP CLEAR OF SENSOR)

Tuesday, July 19, 2016 10:01:58 AM

2014 Jeep Patriot Limited

Page 32