Download Print this page

Jeep Patriot 2014 Service Information page 28

Hide thumbs Also See for Patriot 2014:

2014 SUSPENSION Tires & Wheels - Service Information - Compass & Patriot

Fig. 17: Sensor Mounting To Wheel

Courtesy of CHRYSLER GROUP, LLC

4. Remove sensor nut (3) retaining sensor to wheel. While removing nut, hold

pressure against rear of metal valve stem to keep valve stem from pushing

rearward, damaging antenna strap.

5. Remove sensor (1) from wheel (2).

INSTALLATION

Fig. 18: Sensor Mounting - Exploded View

Courtesy of CHRYSLER GROUP, LLC

1 - METAL WASHER

2 - SEAL

3 - NUT (WITH PRESSED-IN WASHER)

4 - CAP (WITH SEAL)

5 - SECTIONAL CUTAWAY OF WHEEL

6 - TPM SENSOR

NOTE:

Before reinstalling an existing tire pressure sensor,

replace seal (2) and metal washer (1) at base of sensor

valve stem (6) to ensure proper sealing.

1. Wipe area clean around sensor/valve stem mounting hole in wheel (5). Make

Tuesday, July 19, 2016 10:01:58 AM

2014 Jeep Patriot Limited

Page 28