Advertisement
F880
Error Code
F890
F891
F893
F894
F8A0
14.5. Mode Table 2
Following modes are available with combinations of the pressed buttons on the player and on
the remote controller unit.
Item
Jitter
display
Error code
display
PDF created with pdfFactory Pro trial version
Unsuitable task number
Meaning
A message is sent during AV task
transmission
Unable to transmit a message to AV
task
FROM altered
EEPROM failure
Unsuitable message command
Operational
Condition and
Key Function
While the player
Jitter display / Measures
is stopped and
and displays jitter.
no disc is
Measurement is repeated
inserted, press
every second. Read error
and hold down
counter starts at 0 at the
mode setting, and increased
the
button
by one as data read fails at
on the player
target block. A small defect
and the number
is allowed to correct by
button, "5" on
retry. Any possibility is
the remote
counted as one increment.
controller unit.
Repetitive errors after retry
Press "FL
increase by two levels or
DISPLAY"
more.
button on
remote control
for next page.
While the player
Error code display /
is stopped and
Displays the latest error
no disc is
code stored in EEPROM.
inserted, press
and hold down
the
button
on the player
and the number
button, "0" on
the remote
controller unit.
www.pdffactory.com
When a message arrives from not existing task
During transmission of a message to AV task
When transmission of a message to AV task starts
When transmission of a message to AV task starts
Details
J
___123
*1
[display1/display2] /
display mode /
measurement value /
error counter
driving value
Values are shown to one
decimal place in the decimal
digit.Focus driving value is
displayed in the hexadecimal
digit.
DVDnn_F--- / *nn: Error history
/ *--: Error number
26
Details
Display
To
_/ _456
_AB
_ /
Press
*2
*3
*4
: Jitter
STOP
*1
: Jitter
*2
: Read
*3
: Focus
/ *4
Automatically
exits
mode
five
Advertisement
