Using The Libraries Window - Casio FIVA MPC-501 Series User Manual

Using the Libraries Window

Use the Libraries Window to create new libraries, open an existing
library (change the active library), and to copy and delete libraries.
The icons on the top of the Libraries Window represent New (create),
Open (change), Copy, and Delete.
Creating a New Library
If more than one person uses the FIVA, it is a good idea if each user
creates a personal Library of Models.
To create a new library
1. Tap the New button (
2. In response to the prompt that appears, enter the name you want
• Normally, you should use the name of the user as the name of the
3. On the New Library dialog box that appears on the display, select
When you want to:
Load the standard smARTwriter library, with
the full range of default model samples
Load all punctuation marks and predefined
gestures and shortcuts only.
• This case, you must train smARTwriter to
4. Tap OK
• Whenever you create a minimal library, smARTwriter automatically
To open an existing library and change the active library
1. On the Libraries Window, select the library you want to open from
2. Tap the Open button (
To copy a library and save it under a different name
1. On the Libraries Window, select the library you want to copy from
2. Tap the Copy button (
3. Enter the name you want to assign to the copy of the library.
4. Tap the OK button to save the copy.
62
to give the new library, and then tap OK.
library.
one of the followings as the type of Library you want to create.
recognize your handwriting style.
"Training smARTwriter" on page
"Using Quick Trainer" on page
launches Quick Trainer.
the list of libraries.
the list of libraries.
).
See
47, and
48.
See "Using Quick Trainer" on page
).
) to display the Copy Library dialog box.
Select:
Standard default
lilbrary.
Minimal lilbrary.
48.