Sven OPTIMA 6 User Manual

OPTIMA
Power Strip Surge Protector
USER MANUAL
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur.
The information in this Manual is given on "as is" terms. The author and the publisher do not
bear any liability to a person or an organization for loss or damage, which has arisen from the
information contained in this Manual.
PURPOSE
SVEN Optima power strip purge protector is designed for connection of electrical appliances
to the electric mains and their protection against high-voltage pulses of surge and permanent
filtration of high-frequency noises.
FEATURES
•
Double-pole switch with light indication of operating modes
•
Varistor protection against high-voltage surges (lightning, industri al interferences)
• Six universal sockets with secure fixation of two-pole plugs and children protection
• Automatic recoverable thermal fuse, no replacement required
• Wall mountable filter in any position
• Fireproof impact-resistant plastic case
PACKAGE CONTENTS
• Power strip surge protector – 1 pc
• User Мanual – 1 pc
•
Warranty card – 1 pc
SAFETY PRECAUTIONS
• Do not connect the surge protector to power mains with overrating voltage
• Do not connect simultaneously the load to the surge protector with total power more than
2200 W
• Do not use in places with possible ingress of liquid, moisture, dust and high temperature
exposure
•
Do not open and do not make any repairs by yourself
•
It is recommended to connect the surge protector to the grounded power mains
•
Shipping and transportation equipment is permitted only in the original container
• Does not require special conditions for realization
• Dispose of in accordance with regulations for the disposal of household and computer
equipment
«ATTENTION! Power strip is equipped with an automatic thermal fuse, which is triggered
when the load exceeds the maximum permissible. When the power strip is disconnected due
to the tripping of the thermal fuse, make sure that the total load is less than the maximum
permissible, disconnect unnecessary consumers, and press the red button of the fuse.»